How to Use
1. Position the Oil Diffuser upright, pull vertically upwards to remove cover from water tank.
2. Connect AC adaptor power cord into the DC input jack found on the bottom of the water tank. It is suggested to route the cable along the recessed portion on the bottom of the water tank.
3. Pour water and essential oil into water tank of the Oil Diffuser. DO NOT fill over the marked ‘MAX’line inside of water tank. DO NOT use boiling water. DO NOT fill while powered on. It is recommended to add 2-3 drops of essential oil for each 100ml of water.
4. Re-attach the cover to the water tank. Spout is adjustable to guide aroma into desired direction. DO NOT operate the Oil Diffuser without the cover.
5. Plug AC adaptor into a wall socket.
6. To switch on, press the “MIST” button and continue to press the “MIST” button to set desired operation time (1 hour, 3 hour, 6 hour or ON for continuous operation) Mist level is adjustable by hard-pressing the “MIST” button until the Oil Diffuser beeps (One beep for high and two beeps for low). To switch off, press ‘MIST’ through the following cycle until it is off. (1 hour -> 3 hour -> 6 hour -> ON -> Off).
7. While the LED light is off, press the “LIGHT” button once to put the LED light in Carousel Mode where the LED will cycle through all the colors continuously. To select a fixed color, press the “LIGHT” button again to cycle through all the colors. There are 2 brightness levels for each color. To shut off LED, hold the “LIGHT” button until LED shuts off. (Fig. 6)
8. It is recommended to drain water from the water tank and keep dry when not in use.
9. For your safety, the Oil Diffuser does not automatically turn on when plugged into a power outlet. To power on, press the “MIST “button once.
10. Misting function and light will switch off automatically when there is an insufficient amount of water, or press “MIST,” to switch Oil Diffuser off
